Grizzly G8621 instruction manual Unpacking, Hardware Figure Miter Gauge Kit Hardware and Qty

Unpacking

The Model G8621 Shaper is shipped from the manufacturer in a carefully packed carton. If you discover the machine is damaged after you’ve signed for delivery, and the truck and driver are gone, you will need to file a freight claim with the carrier. Save the containers and all packing mate- rials for possible inspection by the carrier or its agent. Without the packing materials, filing a freight claim can be difficult. If you need assis- tance determining whether you need to file a freight claim, or with the procedure to file one, please contact our Customer Service.

The G7209/10 is a heavy machine, 770 lbs. ship- ping weight. DO NOT

over-exert yourself while unpacking or moving your machine – you will need assis- tance and power equip- ment. Serious personal injury may occur if safe moving methods are not followed.

If moving this machine up or down stairs, the machine must be dismantled and moved in smaller pieces. Make sure the stairs are capable of supporting the combined weight of the machine parts and the peo- ple moving them.

When you are completely satisfied with the con- dition of your shipment, you should inventory its parts.

In the event that any nonproprietary parts are missing (e.g. a nut or a washer), we would be glad to replace them, or, for the sake of expedi- ency, replacements can be obtained at your local hardware store.

After all the parts have been removed from the carton, you should have:

•Shaper Unit

•Miter Gauge Kit (Figure 2)

•Hardware (Figure 3)

The Miter Gauge Kit Hardware and Qty:

1.	Miter Gauge	1
2.	Fence	1
3.	Clamping Unit	1
4.	Support Fence	1
5.	Push Shaft	1
6.	Pointer	1
7.	Washer	1
8.	Bolts	2
9.	Threaded Knob	1
10.	Special Nuts	3
11.	Ratchet Handle	1

			2.
				4.
1.
			3.
			10.
6.	7.	8.	5.	9.	11.

Figure 2. Miter Gauge Kit.

-8- G8621 Heavy-Duty Sliding Table Shaper