Inventory

Crate contents, see Figure 10.

A.Sanding Unit (Not Pictured)

B.(2) Dust Ports 4"

C.Sanding Belt 100 Grit (G0582/G0445) Sanding Belt 100 Grit (G9962Z/G9962ZX)

D.Sanding Belt 180 Grit (G0582/G0445) Sanding Belt 150 Grit (G9962Z/G9962ZX)

E.(2) Platen Graphite Flap (G0582/G0445)

F.Platen Felt (G0582/G0445)

G.Tool Box

—Phillips Head Screwdriver #2

—Standard Screwdriver #2

—Open-End Wrench 8/10mm

—Open-End Wrench 12/14mm

—Open-End Wrench 17/19mm

—Metric Hex Wrench Set 10 Pcs.

—(2) Door Keys

—(2) Ceramic Limit Switch Rub Rods

—(1) Flexible Grease Gun Extension

—(1) Graphite Holder Bar (G0582/G0445)

C

D

G

B

E

F

Figure 10. Parts layout.

G0445/G0582/G9962Z/9962ZX Wide Belt Sander

Figure 11. Regulator knob.

Dust Collection

An efficient and clean dust collection system is essential to the proper function of the sander. Ensuring a healthy work environment is also dependent upon cleaning and maintaining your dust collection system. For the G0582/G9962Z/ 9962ZX we recommend a minimum of 800CFM at the machine, and for the G0445 we recom- mend a minimum of 1200 CFM at the machine.

To hook up a dust collection system:

1.Install the dust ports (Figure 12) to the mounting locations on the top of the sanding unit with the supplied M6-1 x 10 Phillips head screws.

Figure 12. Typical three-port configuration.

2.Using 4" hose clamps, secure the hoses from your dust collection system to the dust ports.

-17-

Page 19
Image 19
Grizzly G0445, G9962Z, G0582 Inventory, Dust Collection, Crate contents, see Figure, To hook up a dust collection system