Attaching the Nut on
the Model H6086
Components Needed | Qty |
Guitar | 1 |
Floyd Rose Locking Nut | 1 |
Tap Screw M3 X 12 | 2 |
Tools Needed |
|
Narrow Chisel or Razor Blade | 1 |
Drill with a 3⁄32" Drill Bit | 1 |
Depth Stop | 1 |
Phillips Head Screwdriver | 1 |
To install the nut: |
|
1.Use a chisel or razor blade to scrape any fin- ish out of the nut slot. DO NOT remove any wood from the nut slot.
2.Center the locking nut in the nut slot.
3.Drill 3⁄8" deep holes through the two holes shown in Figure 30.
Figure 30. Installing the locking nut.
4.Thread two screws through the locking nut and into the neck.
Truss Rod Cover
Components Needed | Qty |
Guitar | 1 |
Truss Rod Cover | 1 |
Tap Screw M2 X 12 | 1 |
Tools Needed |
|
Drill with a 1⁄16" Drill Bit | 1 |
Depth stop | 1 |
Phillips Head Screwdriver | 1 |
To install the nut: |
|
1.Center the truss rod cover over the hole for the truss rod and press it up against the nut.
2.Use 1⁄16" drill bit to drill 3⁄8" holes through the hole in the truss rod cover and into the peghead.
3.Secure the truss rod cover to the peghead with the tap screw.
Model H6082, H6083, and H6086 Heirloom Electric Guitar Kits |
