Grizzly H6246 instruction manual Inventory Figure Qty

Inventory

FG

H I

C

L

A

J

D

B

K

Figure 3. Inventory.

E

After all the parts have been removed from the two boxes, you should have the following items:

Inventory: (Figure 3)
		Qty
A.	Legs	4
B.	Meat Grinder Assembly	1
C.	Sliding Table	1
D.	Rails (front/rear)	2
E.	Cover Plate	1
F.	Long Fence	1
G.	Long Rail	1
H.	Short Fence	1
I.	Short Rail	1
J.	Box	1
	—Rail Brackets	2
	—Table Brace	1
	—Rubber Feet	4

K.	Bolt Bag	1
	—Hex Bolts M8-1.25 x 16	8
	—Hex Bolt M8-1.25 x 60	1
	—Hex Bolts M6-1 x 16	4
	—Hex Bolts M6-1 x 8	4
	—Hex Nuts M8-1.25	9
	—Hex Nuts M6-1	4
	—Carriage Bolts M6-1 x 12	4
	—Cap Screws M6-1 x 20	2
	—Knob Bolts M8-1.25 x 20	2
	—Set Screws M8-1.25 x 12	2
	—Flat Washers 6mm	4
	—Acorn Nuts M6-1	4
L.	Main Body	1

In the event that any nonproprietary parts are missing (e.g. a nut or a washer), we would be glad to replace them, or for the sake of expedi- ency, replacements can be obtained at your local hardware store.

-10- H6246 Meat Cutting Bandsaw