Fences |
|
Components and Hardware Needed: | Qty |
Long Fence | 1 |
Short Rail | 1 |
Short Fence | 1 |
Long Rail | 1 |
Knob Bolts | 2 |
Set Screws | 2 |
Hex Bolts | 4 |
Rail Brackets | 2 |
Tools Needed: | Qty |
Wrench or Socket 10mm | 1 |
To assemble fence: |
|
1.Mount the two rail brackets to the edge of the table with the hex bolts, as shown in Figure 16.
Figure 16. Rail brackets installed on table.
2.Insert the end of the long rail into the short fence and secure together with one of the set screws (Figure 17).
3.Insert the end of the short rail into the long fence and secure together with the remaining set screw.
Figure 17. Securing fence to rail.
4.Slide the long rail/short fence assembly into the bracket that is mounted on the front of the table.
5.Slide the short rail/long fence assembly into the bracket that is mounted on the left-side of the table.
6.Use the knob bolts to tighten both fence rails to the fence brackets. Your completed assembly should look like Figure 18.
Figure 18. Completed assembly of fences and
rails.
H6246 Meat Cutting Bandsaw |
