Tuners |
|
Components Needed | Qty |
Guitar Neck | 1 |
Bushings | 6 |
Tuning Head Plate | 1 |
Black Screws #3 x 3⁄8" | 7 |
Wooden Block | 1 |
Hammer | 1 |
Peghead Reamer or a Round File (Optional) | ... 1 |
The tuning head plate consists of six machine | |
heads on a metal plate. The machine heads are | |
attached to the headstock with bushings and | |
small screws. |
|
To install the tuners: |
|
1.Place the six bushings into the holes on the face of the headstock (Figure 6). The holes may need to be widened with a peghead reamer or a round file. DO NOT widen the holes too
Figure 6. Installing plastic bushings on head-
stock.
2.Place a wooden block on the bushings and lightly tap the block with a hammer (Figure 7) until the bushings are seated against the face of the headstock.
Figure 7. Seating bushings.
3.Slide the machine heads through the bush- ings from the back face of the headstock.
4.Align the tuning head plate over the mounting holes and secure with #3 x 3⁄8" black screws as shown in Figure 8.
Figure 8. Tuning head plate installed correctly.
Model H7582 Junior Electric Guitar Kit |
