Neck |
|
Components Needed | Qty |
Guitar Neck | 1 |
Guitar Body | 1 |
Neckplate | 1 |
Silver Screws #7 x 13⁄4" | 4 |
The neck is
To attach the neck to the guitar body:
1.Place the neck into the neck pocket (Figure 9). If the neck does not fit into the pocket, lightly sand the high points on the neck until it fits.
2.Place the neckplate over the neck pocket holes and thread four #7 x 13⁄4" silver screws (Figure 10) through the guitar into the neck. DO NOT use glue, since you may want to remove the neck for maintenance and tune- ups.
