5.Slide the new grinding wheel onto the arbor. Be sure not to bump or scratch the wheel as it may dent, crack or otherwise damage the wheel.
6.Align the large holes in the grinding wheel with the screw holes in the connection plate of the grinder.
7.Fasten the wheel to the connector plate with the four bolts. In order to properly balance the wheel, tighten the bolts in the order shown in Figure 9.
8.Run a new wheel for at least one minute while standing clear of the line of rotation. If a wheel does have defects it will generally fail as soon as it gets up to full speed.
4th | Grinding |
Bolt | Wheel |
Arbor | 2nd |
| Bolt |
1st
Bolt3rd Bolt
