Grizzly H7762 Mounting, Components and Hardware Required Qty, Mount the grinder as shown below

Mounting

The Model H7762 weighs 92.5 lbs. Make sure the workbench on which you plan to mount the grinder is sturdy enough to hold the weight of the machine and any downward pressure that may be applied during operation. The workbench should have a level surface and be heavy, or attached to the floor so that it will not move or vibrate during operation.

Components and Hardware Required	Qty
Grinder Unit	1
Hex Bolt M8-1.25 (length varies)	4
Flat Washer 8mm	8
Lock Washer 8mm	4
Hex Nut M8-1.25	4

Note: Because sizes vary for each individual situ- ation, the hardware in this step is not included with the Model H7762.

H7762 Heavy Duty Tool Grinder

Mount the grinder as shown below:

H7762	Bolt
Base

Workbench

Flat

Washer

Lock

Washer

Hex Nut

Figure 4. Mounting machine to the workbench.

-13-