Inventory
Site Considerations
Working Clearances
A
I
C
B
E
D
G
H
J
F
Consider existing and anticipated needs, size of material to be processed through each machine, and space for auxiliary stands, work tables or other machinery when establishing a location for the machine. See Figure 4 for the footprint dimensions of the Model G8027.
28" |
Figure 3. Main box items.
After all the parts have been removed from the two boxes, you should have the following items:
Box Components (Figure 3) | Qty | |
A. | Motor/Impeller Housing | 1 |
B. | Collector | 1 |
C. | Base Plate | 1 |
D. | Bags | 2 |
E. | Rubber Gasket | 1 |
F. | Swivel Casters | 4 |
G. | Collection Bag Support Rods | 2 |
H. | Upper Bag Support Rod | 1 |
I. | Bag Clamps | 2 |
J. | Impeller Housing Support | 1 |
K.Hardware and Tools (Not Shown)
— Hex Bolts | 6 |
— Hex Bolts | 8 |
— Hex Nuts | 4 |
— Hex Nut | 18 |
— Flat Washers 8mm | 12 |
— Flat Washers 5mm | 22 |
— Phillips Head Screws | 6 |
— Phillips Head Screws | 16 |
— Phillips Head Screws | 2 |
— Hex Wrench 5mm | 1 |
— Hex Wrench 4mm | 1 |
In the event that any non proprietary parts are missing (e.g. a nut or a washer), we would be glad to replace them, or, for the sake of expedi- ency, replacements can be obtained at your local hardware store.
16" |
Figure 4. Dust collector footprint.
Unsupervised children and visitors inside your shop could receive serious per- sonal injury. Ensure child and visitor safety by keep- ing all entrances to the shop locked at all times. DO NOT allow unsuper- vised children or visitors in the shop at any time.
G8027 1 HP Dust Collector
