Clean Up
The unpainted surfaces are coated with a waxy oil to prevent corrosion during shipment. Remove this protective coating with a solvent cleaner or degreaser, such as shown in Figure 3. For thor- ough cleaning, some parts must be removed.
For optimum performance, clean all moving parts or sliding contact surfaces. Avoid chlo-
Gasoline and petroleum products have low flash points and can explode or cause fire if used to clean machinery. DO NOT use these products to clean the machinery.
Many cleaning solvents are toxic if inhaled. Minimize your risk by only using these products in a well ventilated area.
Great products for removing shipping grease.
Site Considerations
Floor Load
Refer to the Machine Data Sheet for the weight and footprint specifications of your machine. Some residential floors may require additional reinforcement to support both the machine and operator.
Placement Location
Consider existing and anticipated needs, size of material to be processed through each machine, and space for auxiliary stands, work tables or other machinery when establishing a location for your new machine. See Figure 4 for the minimum working clearances.
80"
457⁄8"
Figure 4. Minimum working clearances.
Children and visitors may be seriously injured if unsuper- vised around this machine. Lock entrances to the shop or disable start switch or power connection to prevent unsupervised use.
Figure 3. Cleaner/degreasers available from
Grizzly.
T23036 37" Foot Shear |
