Special
Note:
7If you wish to remedy other television channels, repeat steps 4 to 7.
8Press »MENU« to end the setting.
Changing stored analogue channels
If channels were stored with the automatic chan- nel search while tuning the television channels, you can delete them. You can also store chan- nels in a different preset, change or enter the name of a channel as well as skip channels.
Selecting a channel list
1Open the menu with »MENU«.
2Select the line »SOURCE SETUP« with »V« or »Λ« and press »OK« to confirm.
– The »SOURCE SETUP« menu appears.
3Select the line »Program Table« with »V« or »Λ« and press »OK« to confirm.
– The »PROGRAME TABLE« menu appears.
Note:
7Additional operations are explained in the following sections.
Deleting channels
1In the »PROGRAME TABLE« menu, select the television channel to be deleted with »V «, »Λ«, »<« or »>« and press »« (red) to con- firm.
2Delete the selected channel by pressing »« (yellow).
Note:
7»« (blue) allows all television channels to be deleted.
3Press »« (green) to confirm the deletion process.
Entering channel names (8 digit maximum)
1In the »PROGRAME TABLE« menu, select the
television channel with »V «, »Λ«, »<« or »>« and press »« (red) to confirm.
2Open the input keyboard with »« (green).
Note:
7If necessary, delete the current channel
name. To do this, select the »
« button with »<« or »>« and delete repeatedly using »OK«.
3Select the required letters or numbers with »V«, »Λ«, »<« or »>« and confirm with »OK«.
Repeat the entry for further letters/numbers.
Note:
7Use the »ABC« button to switch to upper case letters and use the »?@123« button to switch to symbols and numbers.
4Save the channel name by using »V«, »Λ«, »<« or »>« to select »Submit« and confirm with »OK«.
Note:
7If you wish to enter other channel names, repeat steps 1 to 4.
Skipping television channels
You can highlight television channels to be skipped when you select with »Λ« or »V«.
Selection is still possible using the number buttons.
1In the »PROGRAME TABLE« menu, switch over to the list view with »« (yellow).
2Select the preferred channel with »V« or »Λ«.
3Select the column »Skip« with »<« or »>« and use »OK« to mark the channel.
– The channel is marked using »✔«.
Note:
7Channels can also be reactivated. Select the channel with »V« or »Λ«, then select the column »Skip« and reactivate the channel with »OK«.
