ENGLISH
17
Chapter 2 Installing the LCD TV
A
IN
B
OUT
Cable TV Line
2 set signal
splitter
(not included)
RF switch
(not included)
Cable TV converter/
descrambler
(not included)
Cable TV (CATV) Connection
■ The RF switch (not included) is required to provide two inputs (A and B). Setting
the RF switch to position A allows viewing of all unscrambled channels by using
the TV channel keys.
■ Setting the RF switch to position B allows viewing of all scrambled channels via
the converter/descrambler by using the converter channel keys.
■ A 75 -ohm coaxial cabl e connector is built int o the set for easy hookup.
When connectin g the 75-ohm coax ial cable to the set, co nnect the 75-
ohm cable into the A NT. terminal.
■ So me cable TV companie s offer premium pay ch annels. Since the
signals of these pr emium pay channels are s crambled, a cable TV
converter/descra mbler is generally prov ided to the subscribe r by the
cable TV company.
This converter/descrambler is necessary for normal viewing of scrambled channels.
(Set your TV to channel 3 or 4, typically one of these channels is used. If this is unknown,
consult your cable TV company.)
For more specific instructions on installing cable TV, consult your cable TV company.
One possible method of connecting the converter/descrambler provided by your cable TV
company is shown in the diagram below.
VHF/UHF IN