Chapter 2 Installing the LCD TV
Use a supplied antenna cable to connect the TV signal to the LCD TV’s TV CABLE terminal.
TV CABLE
VHF/UHF IN
Connect the AC power cord at the back of the TV and connect the power cord to wall outlet.
TV CABLE |
VHF/UHF IN |
This TV is equipped with a safety fuse. In the event of an electrical storm or power outage the safety fuse is designed to protect your TV. If your TV has no power, check the fuse by prying the cover off, following the illustration below. If the fuse is blown, visit your local hardware store and ask for a 4A 250V - 5x20mm Time Lag Fuse (Slow Blow) to replace the fuse.
Firm Plastic Prying Tool |
|
(Using a metal tool may cause shock) |
|
| 4A 250V |
Back of TV | 5x20mm |
Fuse |
BE SURE TO UNPLUG AC POWER CORD BEFORE REMOVING THE FUSE.
Press the 
button on the remote to turn on the LCD TV.
Always disconnect the LCD TV from the power outlet when the LCD TV will not be used for a long period of time.
The 
button on the front panel is only used for switching the LCD TV into standby, it does not disconnect the device from the main voltage. To completely disconnect the main voltage, please remove the power plug from the socket.
18
