Grundig MF 72-6510/8 Audio settings, Volume, Balance, Stereo / two channel, mono, Stereo width

MAIN MENU

Sound

Picture

Preset list

Channel settings

Settings

Select ●i Exit

Sound

Volume
Balance
Sound type	Stereo
Sound mode	Normal
AVL	Off
Dynamic Bass	On
Equalizer
Headphone
	F
	● Back
	●i Exit

Sound

Volume
Balance
Sound type	Stereo
Sound mode	Normal
AVL	Off
Dynamic Bass	On
Equalizer
Headphone
	F
	● Back
	●i Exit

￿

SETTINGS ______________________________________________

Audio settings

1Press »i« to open the »MENU«.

–The »MENU« appears.

2Select »Sound« with »P+« or »P-« and confirm with »OK«.

–The »Sound« menu appears.

Note:

Further operation is explained in the following sections.

Volume

The standard volume is set here. This is the volume of the device after switching on.

1Select »Volume« with »P+« or »P-« and adjust the setting with »￿« or »￿«.

Balance

1Select »Balance« with »P+« or »P-« and adjust the setting with »￿« or »￿«.

Stereo / two channel, mono

If the device receives two channel programmes, e.g. a film with the original sound on sound channel B (display: »Dual II «) and the dubbed version on sound channel A (display: »Dual I«), you can select the sound channel you desire.

If the device receives stereo or Nicam programmes, it switches automatically to stereo sound (display: »Stereo«).

You can switch the sound to »Mono« if the stereo reception quality is poor.

1Select »Sound type« with »P+« or »P-« and adjust the setting with »￿« or »￿«.

Stereo width

Widens the audio output for stereo programmes and improves the sound with mono reception.

1Select »Sound mode« with »P+« or »P-«.

2Press »￿« or »￿« to select the setting.

ENGLISH

15