CONNECTION/PREPARATION __________
Connecting the antenna and the mains cable
| TV | R |
L | AV 3 |
|
AUDIO |
| |
|
| |
OUT |
|
|
R |
|
|
AV 1 | AV 2 | 1 |
2 |
| |
|
|
1Plug the cable of the outdoor or indoor antenna (passive or active indoor antenna with its own power supply) into the antenna socket »Ä« of the television set.
Note:
When connecting an indoor antenna you may have to try it out at different positions until you get the best reception.
2Plug the mains cable into the wall socket.
Note:
Only plug the device into the mains socket after you have connected the external devices and the antenna.
Inserting batteries in the remote control
1Open the battery compartment by removing the lid.
2 Insert the batteries (Mignon type, for example
Observe the polarity (marked on the base of the battery compartment).
3Close the battery compartment.
Note:
If the television no longer reacts properly to remote control commands, the batteries may be flat. Be sure to remove used batteries.
The manufacturer accepts no liability for damage re- sulting from used batteries.
| Environmental note | |
| Batteries, including those which contain no heavy metal, | |
| may not be disposed of with household waste. Please | |
| dispose of used batteries in an environmentally sound | |
| manner. Find out about the legal regulations which apply | |
6 | ||
in your area. | ||
|
|
