Language
English |
| Nederlands | Türkçe |
Deutsch | Eλληvικα | Polski | |
Francais | Dansk | Pycck | |
Italiano | Svenska | Magyar | |
Español | Suomi | Slovenãina | |
Portuguesa | Norsk | âe‰tina | |
Select
DVB Menu
Manual Search
Automatic Search
Reset receiver
Installation
Signal Information
Select
●F Back
●i Exit
SETTINGS ______________________________________________
Searching for television stations
The television is equipped with an automatic station search system. You start the search and can then sort the television stations into your order of preference.
There are 899 preset positions for digital stations and 100 for ana- logue television stations, to which you can assign television stations from the antenna or from the cable connection (analogue pro- grammes).
1Switch on the television with »« on the television set, then press »P+« on the remote control.
–The »Language« menu appears when the television is first switched on.
Hint:
If the »Language« menu does not appear on the screen, follow the instructions on page 34 to retune all television channels using the automatic search.
2Select language with »P+«,
–The »Channel search - Digital« menu appears and the search begins. The automatic search may last several minutes depending on the number of television channels received.
–The search is finished when the message »Done« appears.
3Press » « (green) to quit the station search.
–The »DVB Menu« appears.
4Select »Installation« by pressing
–The »Installation« menu appears.
5Select »Region« with
6Select the country with »« or »«.
Finishing the settings
1Press »i« to finish the settings.
Note:
If you can only receive analogue television stations, adjust the settings as described in the chapter “Changing stored channels for analogue stations” on page 32.
ENGLISH
9
