SETTINGS ____________________________________________________________________________________
- - AUDIO SETUP - -
|
| s |
|
|
| AUDIO OUT | ANALOG |
| |
| DUAL MONO |
| SPDIF/RAW |
|
| DYNAMIC |
| SPDIF/PCM |
|
| PRO LOGIC |
|
|
|
| PRO LOGIC II MODE |
|
|
|
| PRO LOGIC II CNTL |
|
|
|
\ |
|
|
|
|
MAIN PAGE |
|
|
| |
ANALOG OUTPUT |
|
|
| |
|
|
|
|
|
- - AUDIO SETUP
|
|
|
|
|
| AUDIO OUT |
|
|
|
| DUAL MONO | s | STEREO |
|
| DYNAMIC |
|
| |
| PRO LOGIC |
|
| |
| PRO LOGIC II MODE |
|
| |
| PRO LOGIC II CNTL |
|
|
|
\ |
|
|
|
|
MAIN PAGE |
|
|
| |
|
|
|
|
|
SET STEREO MODE |
|
|
| |
|
|
|
|
|
- - AUDIO SETUP - -
| AUDIO OUT |
|
| – |
| – | FULL |
| |
| DUAL MONO |
|
| – |
| – |
|
| |
|
| s |
|
|
|
|
|
|
|
| DYNAMIC |
| – |
|
| – | 6/8 |
| |
|
|
|
|
|
|
|
|
|
|
| PRO LOGIC |
|
| – |
| – |
|
| |
|
|
|
| – |
| – | 4/8 |
| |
| PRO LOGIC II MODE |
| |||||||
|
|
| – |
| – |
|
| ||
|
|
|
|
|
|
| |||
| PRO LOGIC II CNTL |
|
|
|
| ||||
|
|
| – |
| – | 2/8 |
| ||
|
|
|
|
|
| ||||
|
|
|
|
| |||||
\ |
|
|
| – |
| – |
|
| |
MAIN PAGE |
|
| – |
| – | OFF |
| ||
|
|
|
|
|
| ||||
|
|
|
|
|
|
|
|
|
|
DYNAMIC RNG COMPRESSION 6/8
2Select »AUDIO OUT« with »« or »«.
3Use »« to move to the right column.
–»ANALOG«: the coaxial output is deactivated. »ANALOG« is the default setting.
–»SPDIF/RAW«: the coaxial output provides the original signal format.
–»SPDIF/PCM«: the coaxial output changes into the PCM format for digital recording devices.
4Select the required setting by pressing »« or »« and confirm with »DEMO/OK«.
Multiple channel settings
You can switch the channel playback to Dolby Digital mode if a 1+1 audio code is available i.e. the Dolby Digital signal only contains a stereo signal.
1 Select »AUDIO SETUP« with »« or »« and confirm with »DEMO/OK«.
2Select »DUAL MONO« with »« or »«.
3Use »« to move to the right column.
–»STEREO«: 1:1 stereo playback, CH1 for the left channel, CH2 for the right channel. »STEREO« is the default value.
–
–
–
4Select the required setting by pressing »« or »« and confirm with »DEMO/OK«.
Setting the dynamic range
DTS (AC3) soundtracks have a very large dynamic volume range, hence there is an extreme relationship between quiet and loud tones. If the full playback volume is too loud, simply reducing it does not give a satisfactory result, since dialogue can hardly be heard. You can turn down the louder sounds and turn up the quieter passages, while retaining the volume of the dialogue. This function is called the dynamic range.
1 Select »AUDIO SETUP« with »« or »« and confirm with »DEMO/OK«.
2Select »DYNAMIC« with »« or »«.
3Use »« to move to the right column.
–»OFF«, »2/8« ... »6/8«, »FULL«. »OFF« (default setting) means uncom- pressed dynamics (for example, during the day), »FULL« means com- pressed dynamics (for example, late at night).
4Select the required setting by pressing »« or »« and confirm with »DEMO/OK«.
ENGLISH
23
