OPERATION________________________________
5 Put the base unit A onto the intermediate lid
Fthat is fitted onto the glass bowl I . Make sure that the indicator of the speed control and locking / unlocking button B is at unlock position F. Turn the indicator of button B
to the locked position D. Make sure that the locking handles D of the base unit are clipped properly onto the handles of the glass bowl I .
6 Insert the plug into the wall socket.
7 Turn the speed control and locking / unlock- ing button B clockwise and select the desired speed.
–The appliance starts. Note
■You can press and hold down pulse button C continuously or intermittently. If you want to use only the pulse function, turn the speed control and locking / unlocking button B to the pulse position and press and hold down pulse button C . You can obtain a better qual- ity of chopping with the pulse function.
PULSE
9 Disconnect the power plug from the wall socket. Remove the base unit A and then the intermediate lid F . Carefully take out the chopping blade L carefully. Remove the food from the glass bowl I .
Caution
■Do not touch the chopping blade with your bare hands. The chopping blade is very sharp.
Notes
■Do not operate the appliance continuously for more than 10 seconds, in order to prevent overheating.
■If the chopping blade L does not work or only turns slowly, first pull out the power plug. Then take the base unit A and the intermedi- ate lid F off. Check the glass bowl to see
if there is something blocking the chopping blade. Maybe you put too much food and/or hard food in the glass bowl.
■If the ingredients stick to the side of the glass bowl, use the spatula S to remove the food from the glass bowl. The appliance must be switched off when you do this.
■Make sure that all rotating parts are stopped before removing the intermediate lid.
■Do not operate the appliance when the glass bowl is empty
■After use, clean the chopping blade (see the “Cleaning and Care” section) and store it in the chopping blade plastic cover.
8 Turn the speed control and locking / unlock- ing button B to the Off position when you want to finish the operation.