ENGLISH
15

Setting the time

The first time you connect the hi-fi system to the mains, it switches to
standby. The time appears in the display. You can only set this in
standby mode.
1To activate the setting, press and hold down »MEMORY ¥«.
– Display: »24 H« flashes.
2Select the hour format (12 or 24 hours) with »ß+« on the
hi-fi system or »+« or »« on the remote control and confirm with
»MEMORY ¥«.
– Display: the hours flash.
3Select the time with »ß+« on the hi-fi system or »+« or »«
on the remote control and confirm with »MEMORY ¥«.
– The minutes flash.
4Set the minutes with »ß+« on the hi-fi system or »+« or »«
on the remote control and confirm with »MEMORY ¥«.
– Display: the current time.
Notes:
The current time is displayed in standby mode.
The time must be reset after a power failure or after disconnecting
from the mains.

Tuning and storing radio stations

You can store up to 15 station in the FM (VHF) frequency range and
up to 15 stations in the MW (medium wave) frequency range on
preset presets.
1Switch on the hi-fi system by pressing »8«.
2Select the TUNER input source with »TUNER BAND« on the
hi-fi or »FUNCTION« on the remote control.
3Press »BAND« to select the frequency band (FM or MW).
4Set the radio station by briefly pressing »9« or »8«
repeatedly.
– Display: the frequency changes in steps of 50 kHz
or
SETTINGS----------------------------------------------------------------------------------------------------
1515
FM 93.5MHz
24 H00:0012:0012:23
2_UMS_4700_en.qxd 23.10.2007 9:28 Uhr Seite 15