Haier 50FREE-3B user manual Use the operation buttons, Description of the function of the buttons

4 Use the operation buttons

A.Description of the function of the buttons

Mode and meaning of the indicator light	Digital tube
Off
	During operation of programs, it displays the
Flashing: indicate the running program
	remained time (minute) or remained times of
On: indicate the program about to run, or indicate the selected mode	the corresponding procedure

Check the connection between the water inlet hose and the water tap

1.Swaying the hose gently to confirm if it is fastened stable. 2.After installation, open the tap to check if it leaks. 3.Do not bend the hose with overstrain. 4.Before each usage please check if the connection between the water inlet hose and the water tap, is firm, so as to prevent dropping from improve Installation position.

Push WATER LEVEL/DISINFECT button to select a suitable water level.

After the machine is started, You shall push the START/ -PAUSE button and then push WATER LEVEL/DISINF -ECT button make new setting.

During SAVE program,WATER LEVEL/DISINFECT will not be changed.

During operation of wash and rinse program, you can push down the water level button to add water. When you release the button, or it reaches the overflow water level, the machine will stop adding water .

Push WATER LEVEL/DISINFECT over 2 seconds , DISINFECT tube is light;Push WATER LEVEL/DISINFECT over 2 seconds again, DISINFECT tube is off and the DISINFECT function is canceled.During the washing maching working, push START/PAUSE button ,you can make

new selected.

SPIN button

Push the SPIN button to set the spin procedure.

During STANDARD GENTLE HEAVY programs,push the spin button to set different spin minutes ( 09 minites)

During SAVE program,push

the spin button,the machine have no reaction

Take down the water inlet hose

1.Close the water tap.

2. Pull off the water inlet hose from the water tap and washer

MIN

RINSE button

Push the RINSE button to set the rinse procedure.

During STANDARD GENTLE HEAVY programs,push the RINSE

	button to set different rinse times
(	0, 1, 2, 3, 4 times)

During SAVE program,push

the rinse button,the machine have no reaction

10 7