Names of the parts
Adjustable foot Adjustable foot
film
Water inletvalve
Water-absorption
gasket
Top lid
Control
panel seat
Lint filter
Inner tub
Pulsator
Control
panelfilm
Cabinet
Power
cord
Handle
Drain
hose
Back
cover
Base
Hook
Out tub
cover
Fixed foot(3 pcs)
Innercover
components
The pulsator pauses during water
inlet in wash and rinse. It is to avoid splashing during water inlet
There may be some waterflowing out of the
drain hose in the firstuse of the machine.
It is the waterremained performance inspection
by the factory.
Commonphenomena
Phenomena Explanation
The spinning is intermittentwhen it starts.
Selectspin program, but it does not work.
Balance the laundries to avoid slanting.
The program is setting the drain time , certain
period is needed before itstarts spinning.
The safety switch acts,and the
spinning cannotwork. The
digitron displays E3.
The waterfilling does not work, or is
slow,the digital displays E4.
The drainage cannot work,or is too slow.
The digitron displays E1.
Itstops running in midway. The digitron
displays E2.
The top lid is notclosed. Close the top lid.
Is the drain hose hang up to suitable
height?
Is the drain hose blocked?
Hang up to suitable height . Open and close the
top lid once.
Clean the foreign material. Open and close
The top Lid Once.
Are the laundries putslantingly?
Is the machine slanting?
Reorderthe laundries. Close the top lid.
The machine willstart running after 10
seconds ofbeing placed horizontally.
Is the water tap opened,or is there water
supply failure?
Is the water inletvalve blocked?
Is the water pressure too low?
Is the drain hose hang up to suitable
height?
Open the watertap. Open and close
the top lid once.
Clean the waterinlet valve then open
and close the top lid once.
Open and close the top lid once.
Hang up to suitable height .
Phenomena The reason How to settle
Trouble-shooting answer to question
(If there's breakdown, please pull off the power plug before checking) The following phenomena are notbreakdowns
sometimes. Please confirm again before sending it to repair. If there are real breakdowns, please come to the special
maintenance departmentor after-sale service department of our company. Do not repair it by yourself.
The waterlevel sensor is bad. Please contractthe after-sales
service department
Is the machine slanting?
Are the laundries putslantingly in spinning?
Are there any foreign materials?
Is the jointer of water
inlethose loose or awry?
Adjustthe machine to be even
Reorder the laundries and close the top lid.
Remove the foreign materials.
Fasten the jointer properly.
The watertap leaks
The digitron displays F1.
There's abnormalsound
inside the machine
The machine does
notact
Notwash
Notspin
Is there power failure?
Is the power plug inserted tightly?
Is the water levelreached preset position?
Please use itwhen there's power supply.
Insert the powerplug tightly.
Fillwater to the preset position.
Is the powerplug inserted tightly?
Is the top lid closed reliably?
Are the laundries setflat?
Insert the powerplug tightly.
Close the top lid.
Setthe laundries flat.
16 1
Meaning and description of the symbols
Contents marked with that symbol are actions forbidden
to perform. Performing of those actionmay result in
damageof the machine or influence the personal safety of
the users.
Contents marked with thatsymbol are related to the
safety of the product and the personal safety of the users.
Please operate in strict conformity to the contents.
Warning sign
Forbidden sign