Maintenance
[Clean air filter]
NOTE When having to clean, don't dismantle
In the environment where there is too
much dust, air filter should be cleaned
for more times.
(about half a year one time)
(B)Wash with water.
With too much dust, use soft brush and neutral
detergent.
Swing off the water, and then place in cool place.
1. Open inlet grill
Press the elliptical "PUSH" knob, the inlet
grill will automatically drop. (the inlet grill
is catched with two pothooks)
Press the elliptical knob
PUSH
the inlet grill will automatically drop
Open two | Pothook |
pothooks |
|
2.Open two othooks
3.Dismantle air filter
5.Install air filter
(1)Put filter into protruding parts at the top of the inlet grill.
(2)Connect the two pothooks with inlet grill See 2
Connet the two pothooks with inlet grill
6.Close inlet grill See 1.
7.Press the filter signal return key on the
controller. '' ''
| Drag the knob of | |
| the grill back lift | |
Air filter | the filter and take | |
down. | ||
|
4. Clean
CAUTION!
[Clean inlet grill]
1. Open inlet grill
Press the elliptical "PUSH" knob, the inlet
grill will automatically drop. (the inlet grill
is catched with two pothooks)
PUSH
Press the elliptical knob the inlet grill will automatically drop
(A) Remove dust with vacuum filter.
Open two | Pothook |
pothooks |
|
14