Installation procedure

Connection of pipe

1. Connection of pipe

 

Joint

Nut

**The max length of connection pipe is 50m, the max fall is 30m.

 

 

The attentive matters in connection of pipe

 

 

 

In order to guarantee the efficiency, the

Spanner

 

 

 

 

 

pipe should be as short as possible.

 

 

Spanner

Do not make the connection pipe distorted and deformed.

 

 

 

Do not let dust enter into pipe.

 

 

 

When bending the pipes, give the roundness as large as possible.

 

Both gas pipe and liquid pipe should be thermal insulated.

 

 

There should be no leakage at the flare parts.

 

 

 

If do not fit the center and screw the nut hard, the screw thread may be damaged, which will cause refrigerant leakage.

Pipe diameter

Fasten torque

Liquid pipe

9.52mm

32.7~39.9

Gas pipe

19.05mm

97.2~118.6

**Connection method

***Daub the refrigerant oil on the joint and the flared nut.

***When bending the pipes, give the roundness as large as possible.

***To connect the pipe, fit the center and use hand to screw the nut, then use spanner to tighten the nut, as shown in figure.

***Pay attention not to let alien matters, such as sand, get into the pipe.

2. The additional charging amount of refrigerant

The additional charging of refrigerant (R407C) should be complied with the installation manual of outdoor unit. It must use measurer to quantificationally charge. The additional charging amount must be complied with the specified amount.

Requirements: Both excessive charging and less charging of refrigerant will cause the compressor trouble. It must be complied with the specified amount.

3.Vacuumizing

Use vacuum pump to vacuumize from the stop valve of the outdoor uin.

It is strictly prohibited to use the refrigerant sealed in the outdoor unit to perform air discharging.

4.Leakage detection

Use leakage detector or soap water to check if the connected part of the connection pipe and the valve cap leak.

5.Thermal insulation treatment

The thermal insulation of connection pipe should be performed at both gas side and liquid side. In COOLING, both liquid side and gas side are in low temperature, in order to prevent dew from forming, thermal insulation should be done.

The thermal insulation material at the gas side must use the material with the heat resistant temperature over 120*.

The connected parts of indoor unit connection pipe should be thermal insulated.

33

Page 34 Page 36
Page 35
Image 35
Haier AB422BCBAA manual Connection of pipe
Page 34 Page 36

AB422BCBAA specifications

The Haier AB422BCBAA is a significant addition to the world of durable and efficient refrigerators, offering various features designed to optimize user convenience and energy consumption. This model is particularly known for its sleek design and availability in versatile color options, making it a stylish choice for contemporary kitchens.

One of the standout features of the Haier AB422BCBAA is its impressive storage capacity. With multiple shelves and compartments, this refrigerator provides ample space for groceries, beverages, and meal prep items. The adjustable shelves allow users to customize the interior layout for larger items, ensuring that no space goes unused.

This refrigerator incorporates advanced cooling technologies, such as the intelligent inverter compressor, which adjusts cooling power based on the ambient temperature and internal load. This feature not only contributes to more efficient energy usage but also helps maintain optimal food preservation conditions.

Energy efficiency is a core attribute of the Haier AB422BCBAA. It is designed to meet or exceed regulatory standards, allowing users to save on electricity bills while also being eco-friendly. The refrigerator operates quietly, contributing to a peaceful home environment.

The Haier AB422BCBAA also includes a frost-free system, which eliminates the need for manual defrosting, thus saving time and effort for users. Moreover, it is fitted with a digital temperature control system, providing precise adjustments for different types of food and ensuring consistent cooling throughout the unit.

Another user-friendly feature is its LED lighting, which not only illuminates the interior well but also consumes less energy compared to traditional refrigerator lighting solutions. The door compartments provide additional storage for smaller items, making them easily accessible and organized.

Safety is a priority with Haier, and this model boasts several safety features, including a child lock function, ensuring that the refrigerator is safe in households with young children.

Overall, the Haier AB422BCBAA stands out for its combination of modern design, innovative technologies, and user-friendly features. It is an ideal choice for anyone looking for a reliable refrigerator that meets a range of storage needs while being stylish and energy-efficient.
Top Page Image Contents