Operation points
Operation of air conditioner
When the ambient humidity is too high, in COOLING or DEHUMIDIFYING mode, there may be water dropped in the air outlet.
Anti-cold air blowing out
During Heating operation, after starting the unit, the indoor fan motor will not rotate immediately to prevent cold air from blowing out.
P l e a s e w a i t
?
3-minute protection function
If start the unit immediately only after it is turned off, the compressor will start after 3 minutes have elapsed to protect the compressor.
Defrosting function
During Heating operation, when frost formed on the heat exchanger of outdoor unit, the air conditioner will de frost automatically for several
minutes. During defrosting, both the fan of indoor and outdoor unit do not run. After finishing defrosting, the air conditioner will automatically resume operation.
Change of fan speed
InCOOLINGmode,theairsendingissetatAUTO,whenthe indoortemperatureisnearthesettemperature,thefanspeed willlowerautomatically.InHEATINGmode,whenroom temperaturereachesthesettemperature,thecompressorwill stoprunning,andthefanwillchangetoLOWFANorstop. InDEHUMIDIFYINGmode,thefanspeedwillchange automatically.
Hint
When the air conditioner is in Heating mode, it absorbs heat from outside and release to indoors. So the outdoor temperature may affect the Heating effect.
Power failure resume function (please set and use this function according to actual condition) After setting power failure resume function, if there is a sudden power failure during unit operation, when power on for again, the unit will resume the previous state.
Setting method: when the wire controller is in ON state (except for TIMER and FAN mode), press the SLEEP button for 10 times in 5 seconds, after the buzzer sounds 4 times, the unit will change to POWER FAILURE RESUME function.
Cancellation method: press the SLEEP button 10 times in 5 seconds, after the buzzer 2 times, the POWER FAILURE RESUME function is cancelled.
Note: After the unit is set POWER FAILURE RESUME function, if there is a sudden power failure in using, during this period of time if there is no need to use the unit for a long time, please cut off power to prevent the air conditioner from automatically resuming to the previous setting if power failure resumes, or press the ON/OFF button to turn off the unit after power failure resumes.
1