Operation
Dry
A
|
| TEMP |
|
3 |
| ON | 3 |
|
| ||
| 1OFF | FAN | |
HEALTH |
| ||
|
| 5 | 4 |
| MODE | HEALTH AIRFLOW | |
2 | SLEEP | FRESH | SWING |
| CLOCK |
| SET |
| TIMER |
| STERILIZE |
| RESET | CODE LIGHT | LOCK |
1Press ON/OFF button Unit starts running.
The previous status appears on the display (except. TIMER, SLEEP mode)
2Press MODE button. For each press, operation mode changes as follows:
Remote | AUTO COOL DRY FAN HEAT |
controller |
Select Drying operation shows" "
Dry operation starts
3Select temp. button Press TEMP button
Every time the button is pressed, temp. setting increases 1 C Every time the button is pressed, temp. setting decreases 1 C If the button is kept pressed, setting will increase or decrease
quickly.
4Press FAN button. For each press, fan speed changes as follows:
Remote
controller LOW MID HIGH AUTO
Unit runs at the speed displayed on LCD.
In DRY mode, when room temp.becomes 2 C lower than temp. setting,unit will run intermittently at LOW speed regardless of FAN setting.
5 Press ON/OFF button | COOL operation starts when room |
| temp. is higher than temp. setting. |
Unit stops running, and when | Temp.setting+2 C |
entering this mode for the next | Temp.setting |
|
time, it will show the previous setting |
| On reaching 2 C lower than temp. |
|
| setting,unitwill run in mild DRY mode. |
11