Haier AS122XHERA Timer on/off operation, Remote control unit, Operation, TIMER operation, Hints

Operation Timer on/off operation

Remote control unit

TIMER operation

Set Clock correctly before starting Timer operation (refer to page 2)

You can let unit start or stop automatically at following times: Before you wake up in the morning, or get back from outside or after you fall asleep at night.

TIMER ON/OFF

(1)After unit start, select your desired operation mode. Operation mode will be displayed on LCD.

(2)TIMER mode selection

Press TIMER button to change TIMER mode.

Every time the button is pressed, display changes as follows:

Remote controller

	ON		OFF		ON	OFF	BLANK
AM 12:00		PM 12:00		AM 12:00		PM 12:00
TIMER ON		TIMER OFF			TIMER ON-OFF

A

Select your desired TIMER mide (TIMER ON or TIMEROFF) ON or OFF will flash.

(3) Timer setting

Press HOUR / button.

Every time the button is pressed, time increases 1 min, If button is kept pressed, time will change quickly.

Every time the button is pressed, time decreases 1 min, If button is kept pressed, time will change quickly. Time will be shown on LCD. It can be adjusted within 24 hours.

(4) Confirming your setting

After setting correct time, press SET button to confirm, " ON " or " OFF " stops flashing.

Time displayed: Unit starts or stops at x hour x min (TIMER ON or TIMER OFF)

Timer mode indicator on indoor unit lights up.

To cancel TIMER mode

Just press TIMER button several times until TIMER mode disappears.

Hints

	TEMP
	ON
HEALTH	OFF	FAN
MODE	HEALTH AIRFLOW

SLEEP FRESH SWING

CLOCKSET

TIMERSTERILIZE

RESET CODE LIGHT LOCK

After replacing batteries or a power failure happens, Time setting should be reset.

Remote controller possesses memory function when use TIMER mode next time, just Press SET button after mode selecting if timer setting is the same as previous one.

16