English
Proper Beverage Center Care and Cleaning
Cleaning and Maintenance
WARNING: | To avoid electric shock, always unplug your |
| Beverage Center before cleaning. Ignoring this |
| warning may result in death or injury. |
CAUTION: | Before using cleaning products, always read and |
| follow manufacturer’s instructions and warnings to |
| avoid personal injury or product damage. |
General: | • Prepare a cleaning solution of |
| mixed with warm water. Use sponge or soft cloth, dampened |
| with the cleaning solution, to wipe down your beverage center. |
| • Rinse with clean warm water and dry with a soft cloth. |
| • Do not use harsh chemicals, abrasives, ammonia, chlorine |
| bleach, concentrated detergents, solvents or metal scouring |
| pads. Some of these chemicals may dissolve, damage and/or |
| discolor your beverage center. |
Door Gaskets: Clean door gaskets every three months according to general instructions. Gaskets must be kept clean and pliable to assure a proper seal
•Petroleum jelly applied lightly on the hinge side of gaskets will keep the gasket pliable and ensure a good seal.
Power Interruptions
•Occasionally there may be power interruptions due to thunderstorms or other causes. Remove the power cord from AC outlet when a power outage occurs. When power has been restored, replug power cord to AC outlet.
Vacation and Moving Care
•For long vacations or absences, empty food from beverage center and clean the beverage center and door gaskets according to "General Cleaning" section. Leave doors open, so air can circulate inside.
•When moving always move the beverage center vertically. Do not move with the unit lying down, as possible damage to the sealed system could occur.
Note: After moving, wait for 24 hours before plugging in the beverage center.
11