English

English

6.Stand dishwasher upright.

7.The dishwasher must be secured to the cabinet. There are two brackets on top of the dishwasher that usually can be attached to the countertop. If this is not possible, the brackets “M” may be moved to the sides of the dishwasher.

If you are going to attach the dishwasher to the countertop, skip to step 13.

If you are going to attach the dishwasher to the sides of the cabinet, follow steps 8 through 12.

8.To remove the brackets from the top, flatten tab “N” at back of brackets with pliers and pull the brackets out of the slots “O”.

9.Break off the end of the bracket along the scored line “P”.

10.Open dishwasher door and place towel “Q” over pump assembly and spray arm of dishwasher. This will prevent screws from falling into pump area when securing dishwasher to countertop.

11.Open dishwasher door and push the plastic buttons “R” out of the side of the tub.

NOTE: Save the buttons to cover the holes after dishwasher is installed.

12.Push bracket into slot “S” on the side of dishwasher and bend tab in towards the side of the dishwasher so that it keeps the bracket in place.

17

Page 18
Image 18
Haier DW-7777-01 manual English 6. Stand dishwasher upright