Haier DWE-3120A Disposal after washing

Clean

The filter screen of the water inlet valve is likely to be

blocked by foreign materials and influence the water inlet.

Please clean it with brush every two months.

Using process

Using process

Disposal after washing

After using, please clean the lint and foreign materials of the lint filter etc. in time. Otherwise it may influence your using the machine.

The lint filter must be used during washing.

It must be cleaned in time after each using

Lint filter:

1. Pull it up to dismantle.

2. Clean the filter screen after washing.

3. Push it down to install.

Clean the detergent box, then set it on

the control panel seat

Dismantle Install

If the cabinet is dirty, wipe it with wet cloth

Do not flush it directly with water.

Wipe it with neutral detergent.

Do not wipe it with thinner, petrol, alcohol etc.

1.After washing, close the water faucet. ( If needed, you can dismantle the water inlet hose).

Thinner

Petrol

Alcohol

Please first pull off the power plug from the receptacle before cleaning.

5.Wipe off the water drops on the surface of the machine and inside the tub. Open the top lid for some time (about 1 hour),

then close the top lid.

4.Hang up the power cord and drain hose.

3.Be sure to pull off the power plug before maintenance.

2.Do not store water in the washing machine for a long period. Drain the water completely after each using.

Contents

Main User's manual DWE-3120A Computerized Full-auto Washing Machine Contents Before using Using Process Before Using Accessories Meaning and description of the symbols Before Using Names of the parts Before Using Before Using Safety precautions Before Using Before Using Safety precautions Before Using Before Using Installation and adjustment Install the lint filter Adjust the Installation position 1.Lean the machine down gently with the front surface facing the ground. How to change the direction of the drain hose Usage of the drain hose Before Using Confirm the water faucet Connection between the water inlet hose jointer and the water faucet Before Using Install the water inlet hose Connection between the water inlet hose and the washer Dismantle the water inlet hose Connection between the jointer of the water inlet hose and the water inlet hose Check the connection between the jointer of the water inlet hose and the water faucet 1 Preparation before washing Pay attention to following before washing Pay attention to followings before washing the laundries Reference weight of the laundries: blending coat about 800g 2 Put in the laundries 3 Usage of the detergent Using process How to use the whitener Water level , water quantity and selection of powder How to use the washing powder 10 4 Use the operation knobsand buttons Description of the function of the knobs and buttons Mode and meaning of the VFD indicator RESERVE button Digital tube POWER ON/OFF button PROCESS button START/PAUSE button PROGRAM button Steps of using the operation buttons and description of the steps Push PROCESS button to select suitable procedure Attention Selection method of the procedure programs Push the WATER LEVEL button to selection suitable water level Time list of each program (minute) About 4 Push the RESERVE button to select the suitable reserve program 5 close the lid 6 finish washing Push the START/PAUSE button Confirm the reserve program Disposal after washing Trouble-shooting Answer to question Page Specification