Installation and adjustment | Before Usingi |
Please install and adjust the machine according to the requirement of the manual. It is very important to your security and correct operating the machine.
Install the lint filter
After opening the package, please take out the |
| |
lint filter from the document bag and install it | Filter frame | |
into the Filter frame of the inner tub. See to the right Figure. | ||
| ||
| Lint filter |
Adjust the Installation position
The largest allowed slope of the shank base of the machine is 2 
. The slanting or rough ground will result in unstable running or stoppage of the machine. Please adjust it with following methods:
Confirm it's horizontal
Hang the plumb to confirm it's horizontal
Confirm it's horizontal:
If the bulb of the level meter at the balance display position is inside the standard circle, it indicates that the machine is horizontal. Otherwise you need to a d j u s t t h e a d j u s t a b l e l e g o f t h e m a c h i n e .
Air bubble
SuitableNot suitable
Standard circle
Adjust the adjustable foot
(1)To twist the adjustable foot at the right front of the cabinet (front the sight of front), please first lift up the side of the foot slightly, loosen the adjustable nut, and twist the foot.
(2)Fasten the nut after adjustment.
Loosen
High
adjustable nut
Fasten
adjustable foot
Low
