After the reserveis started, it rings and the
digitaltube displays E0
The safety switch acts. The spinning
can not work (after twice revising)
The digital tube shows E3 and it rings.
It does not do water inlet or the speed
is slow ( the water level is not reached
after15 minutes). The digital tube
displaysE4 and it rings.
The draining does notwork ,or the speed of
draining is too slow. The digitaltube displays
E1 and it rings.
It stops runningduring spin .the digital
tube displaysE2 and it rings.
Is the power plug loose?
The top lid is not closed.
The top lid is not closed.
Close the top lid.
Close the top lid.
Is the drain hose put down?
Are the laundries put slantingly? Re-order the laundries. Close the top lid.
Is the drain hose blocked by
foreign material?
Is there power failure? Use it when the power is on.
Insert the power plug tightly.
Is the machine slanting?
Is there metal material inside the
washing machine?
Are the laundries slanting in spinning?
Is the jointer screw of the water inlet
hose loose or twisted awry?
Level the machine properly.
Re-order the laundries. Close the top lid.
Fasten the fastener or zip up the zip.
Fasten the jointer screw properly.
The water faucet leaks.
the machine does not act .
(The indicators are off.)
It is the water remained in the factory inspection of performance.
Common phenomena
Phenomena Explanation
Balance the laundries to avoid slanting.
The program is setting the drain time. Some time is needed
before it starts spinning.
It is to avoid splashing during water inlet.
The spinning is intermittent when it starts.
The pulsator pauses during water inlet in wash and rinse.
There may be some water flowing out of the drain hose in the first
use of the machine.
Push the PROCESS button to select SPIN, but it doesn't work.
There's abnormal sound inside
the machine.
Is the machine slanting? Level the machine in right position.
Open and close the top lid once.
Phenomenan The reason How to settle
Trouble-shooting Answer to question(If there's breakdown, please pull off the power plug before checking) The following phenomena are not breakdowns sometimes.
Please confirm again before sending it to repair. If there are real breakdowns, please come to the special maintenance department
or after-sale service department of our company. Do not repair it by yourself.
Is the water faucet open or is there water
supply failure?
Is the water inlet valve blocked. Clean the water inlet valve .
Open and close the top lid once.
Open the water faucet.
Open and close the top lid once.
Clean the foreign material .
Open and close the top lid once.
Put down the drain hose.
Open and close the top lid once.
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*