Haier HNDE03VS manual Fig. #3, Fig. #4

11.Remove screws from the other side and insert in the previously removed screw holes. Remove leveling leg.

12.Remove door pin by turning counter clockwise and reinsert to the underside of the bracket and tighten.

13.Align bracket and insert (2) remaining screws into the holes provided . Tighten all the way. Replace leveling legs and place refrigerator in upright position.

14.Replace washers and cap over pin. Align hole in the refrigerator door with the door pin and gently push down until firm.

15.Insert pin from center hinge bracket into refrigerator door hole and align center hinge bracket holes to the screw holes in the cabinet.

16.Insert 2 screws and tighten.

17.Place washers on the center hinge bracket pin

and align the freezer door holes and insert into pin.

18.Replace screws on the top hinge cover, align door and tighten screws.

19.Replace top hinge cover.

English

Fig. #3

Hole Plugs	Door Axis
	Hole Cover

Middle

Hinge

Hole Plugs Screws

Bottom

Hinge

Tall Leg Tall Leg

Screws

Short Leg

Fig. #4

6