Operation | Sleep Function |
|
|
Before going to bed you can press down the SLEEP button and the air conditioner will run so as to make you sleep more comfortably.
Before using this function, the clock must be set.
Use of SLEEP function
After the unit's start, set running mode and then press SLEEP button once to make the air conditioner have the 
/ 
: you can choose the time in 1~8 hours. Each time the button is pressed, the time increases/decreases 1 hour: "xh" and "OFF" indications appear on the display.
Operation Mode
1.In COOL, DRY mode
One hour after sleeping operation start, the temperature
is 1 
C higher than the setting one. After another hour, temperature rises 1
C: sleep run continuously for another 6 hours and then stops. The actual temperature is higher than the setting one which is to prevent from being too cold to your sleep.
SLEEP RUN BEGINS | SLEEP RUN STOPS | |
| about 6 hrs | |
|
| increase 1 C |
1 hrs | increase 1 C | |
SETTING T |
| SHUT DOWN |
In COOL,DRY mode | ||
2.In HEAT mode
One hour after sleeping operation start, the temperature
is 2 
C lower than the setting one. After another hour, temperature decreases by 2 
C more. Temperature will automatically rise by 1 
C after another 3 hours' continuous operation. The actual temperature is lower than the setting one which is to prevent from being too hot to your sleep.
3.In AUTO mode.
The air conditioner will run in corresponding sleep operation according to the automatically selected operation mode.
SETTING T |
| SHUT DOWN |
1 hrs | decrease 2 C | |
1 hrs |
| |
| decrease 2 C | |
|
| about 6 hrs |
| 3 hrs | increase 1 C |
SLEEP RUN BEGINS |
| SLEEP RUN STOPS |
In HEAT mode | ||
|
| A |
Notes:
After setting SLEEP function, it is not possible to set clock.
If
Set " TIMER ON " or " TIMER OFF "In COOL,DRY mode function first, then set SLEEP. After set SLEEP function, the TIMER function cannot be set.
A
U
T
O
OFF
TEMP
ON
OFF
SWINGFAN
MODESLEEP
HEALTH FRESH
CLOCKSET
TIMERHIGH/SO
FILTERHEAT
RESET CODE | LIGHT LOCK |
| |
|
|
|
|
|
|
|
|
9
