Operation | Timer |
|
|
Manual Operation
Remote controller operation
A
Set clock correctly before starting TIMER operation
1.Unit start
After unit start, select your desired operation mode (operation mode will be displayed on LCD)
OFF
TEMP
ON
OFF
SWINGFAN
| 1 |
MODE | SLEEP |
HEALTH | FRESH |
CLOCK | SET |
2 TIMER | 3HIGH/SO 6 |
4FILTER 5 | HEAT |
RESET CODE | LIGHT LOCK |
2.TIMER mode selection
Press TIMER button on the remote controller to change TIMER mode. Every time the button is pressed, display of TIMER mode changes as follows:
|
|
| ON |
|
|
| OFF |
|
|
|
| ON |
|
|
| OFF |
|
| blank |
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| ||||||
|
| AM 12:00 |
| PM 12:00 | AM 12:00 |
| PM 12:00 | ||||||||||||||
| TIMER ON TIMER OFF |
| TIMER | ||||||||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| ||
Then select TIMER |
|
|
| will flash. | |||||||||||||||||
ON |
3.Time setting for TIMER ON
Press time button
Every time the button is pressed, time increases 10 minuts. If the button is kept pressed, time will changes quickly.
Every time the button is pressed, time decreases 10 minuts. If the button is kept pressed ,time will changes quickly.
It can be adjusted within 24 hours at will.
AM refers to morning and PM refers to afternoon.
4.Timer confirming for TIMER ON
After setting correct time, press TIMER button to confirm time. Now ON stops to flash, while OFF starts flashing.
5.Timer setting for TIMER OFF
Press time buttons and follow the same procedures in " Time setting for TIMER ON"
6.Time confirming for TIMER OFF
After time setting, press SET button to confirm time.
7.Canel TIMER mode
OFFstops to flash.
Just press TIMER button several times until TIMER mode disappears.
According to the time setting sequence of TIMER ON and TIMER OFF, either
If the time setting of TIMER ON is the same as TIMER OFF, TIMER
11