Haier HPU-42CF03 operation manual Operation, Air conditioner will run at the selected fan speed

Operation

AUTO, COOL , HEAT and DRY Operation

Manual Operation
Remote-control unit	1. Unit start
	Press ON/OFF button,unit starts.
	Previous operation status appears on LCD (except for
A	TIMER,SLEEP and SWING setting)

	A
	U
	T
	O
		TEMP
3		ON	3
		OFF
SWING			FAN
	5	1
			4
MODE			SLEEP
2HEALTH		FRESH
CLOCK			SET
TIMER			HIGH/SO
FILTER			HEAT
RESET CODE		LIGHT	LOCK

COOL operation starts when room temp.is higher than temp.

setting.

Ultra-low air flow

Temp. setting +2C

Temp.setting

On reaching temp.setting +2C, unit will run in mild DRY mode.

2.Select operation mode

Press MODE button. At each press, operation mode changes as follows:

AUTO COOL DRY HEAT FAN

Then select AUTO run or select COOL operation or

select DRY operation or select HEAT operation

3.Temperature setting

Press TEMP button.

Every time the button is pressed, temp. setting increases 1C; if the button is kept pressed, temp. setting will increase quickly.

Every time the button is pressed, temp. setting decreases 1C, if the button is kept pressed, temp. setting will decrease quickly.

Set proper temperature

4.Adjust FAN button

Press FAN button. At each press, fan speed changes as follows:

A

U

T

O

AUTO LOW MED HIGH

Air conditioner will run at the selected fan speed.

5. Unit stop

Press ON/OFF button,unit stops.

In ATUO mode, the temperature setting is displayedon LCD. In this mode, during running air conditioner will select COOL, HEAT or FAN mode automatically according to the room temperature.

In DRY mode, when room temperature becomes 2 C higher than temperature setting, unit will run intermittently at LOW speed regardless of FAN setting. When room temperature is lower than temperature setting, unit will only run FAN operation.

In HEAT mode,warm air will blow out after a short period of time due to cold-draft prevention function.

6