Operation
TIMER Operation
Set Clock correctly before starting Timer operation
You can let unit start or stop automatically at following times: Before you wake up in the morning, or get back from outside or after you fall asleep at night.
TIMER ON/OFF
(1)After unit start, select your desired operation mode. Operation mode will be displayed on LCD.
Power indicator on indoor unit lights up.
(2)TIMER mode selection
Press TIMER button to change TIMER mode.
Every time the button is pressed, display changes as follows:
ON 
OFF 
blank
TIMER ON TIMER OFF
Select your desired TIMER mode (TIMER ON or TIMER OFF) ON or OFF will flash.
(3)Timer setting
Press HOUR
/ 
button.
Every time the button is pressed, time increases 1 hour. If button is kept depressed, time will change quickly.
Every time the button is pressed, time decreases 1 hour. If button is kept depressed, time will change quickly. Time will be shown on LCD. It can be adjusted within 24 hours.
ON
ON/OFF TEMP
1
MODESET
3 | 4 |
FAN | TIMER |
32
SWING CLOCK
HEALTH POWER/SOFT
LOCK 
RESET
(4)Confirming your setting
After setting correct time, press SET button to confirm, "ON" or "OFF" stops flashing
Time displayed: Unit starts or stops at x hour . (TIMER ON or
TIMER OFF).
Timer mode indicator on indoor unit lights up.
To cancel TIMER mode
Just press TIMER button several times until TIMER mode disappears.
Hints
After replacing batteries or a power failure happens, Time setting should be reset. Remote controller possesses memory function, when use TIMER mode next time, just press SET button after mode selecting if timer setting is the same as previous one.
10
