Operation
Dry Operation
(1) Unit start
Press ON/OFF button, unit starts.
(2) Select operation mode
Press MODE button. For each press, operation mode changes as follows:
COOL DRY HEAT
Unit will run in operation mode displayed on LCD. Stop display at your desired mode.
ON/OFF TEMP
1 | 3 | 3 |
6MODE |
| SET |
(3) Select temp. setting
Press TEMP button.
Every time the button is pressed, temp. setting increases 1oC 
Every time the button is pressed, temp. setting decreases 1oC
Unit will start running to reach the temp. setting on LCD.
(4) Fan speed selection
Press FAN button. For each press, fan speed changes as follows:
2
FANTIMER
4
SWING CLOCK
5
HEALTH POWER/SOFT
LOCK 
RESET
AUTO HI MED LO
COOL operation starts when room |
|
temp. is higher than temp. setting. | |
|
Unit runs at the speed displayed on LCD.
In DRY mode, when room temperature becomes lower than temp.setting+2oC,unit will run intermittently at LOW speed regardless of FAN setting.
Temp. setting+2oC
Temp. setting
On reaching temp. setting, unit will run in mild DRY mode.
Hints
Remote controller can memorize each operation status. When starting it next time, just press ON/OFF button and unit will run in previous status.
8
