Haier HWE12XCN USING THE REMOTE CONTROL cont, To Clear Timer Delay Program, Timer Off, Timer On

ENGLISH

USING THE REMOTE CONTROL cont.

TO SET TIMER TO TURN ON THE AIR CONDITIONER, CHANGING THE PREVIOUS SETTINGS:

1.Turn on the air conditioner.

2.Adjust the mode to Fan, Energy Save,Cool or Dehum.

3.For Fan or Dehum mode,adjust the fan speed to High,Med or Low. For Cool or Energy Save mode,adjust the fan speed to High,Med, Low or Auto Cool.

NOTE:In Dehum mode,when the set temperature is close to the ambient temperature,the compressor may stop and the fan will run in low speed only.

4.Adjust the temperature between 61°F and 86°F (16°C and 30°C). NOTE: In Fan mode, the temperature cannot be set.

5.Press TIMER. Timer On indicator light on the air conditioner control panel will flash. Display will show remaining hours before the air conditioner will turn on.

6.Press the TEMP/TIME up or down arrow button to change the delay time from 1 hour to 24 hours.

7.Timer On indicator light on the air conditioner control panel will remain on.

TO CLEAR TIMER DELAY PROGRAM:

NOTE: Air conditioner can be either on or off.

Press TIMER until Timer indicator light turns off.

TO SEE OR CHANGE THE REMAINING TIME (IN HOURS):

TIMER OFF:

1.Press the TEMP/TIME up or down arrow button to increase or decrease the time.

2.After 5 seconds, the display on the air conditioner control panel will show the remaining time to Timer Off.

TIMER ON:

1.Display on the air conditioner control panel will show remaining time.

2.Press the TEMP/TIME up or down arrow button to increase or decrease the time.

USING YOUR AIR CONDITIONER PAGE 19