Haier HWE10XCN Location Requirements, The Location Should Provide, Window Installation, English

ENGLISH

LOCATION REQUIREMENTS

IMPORTANT: Observe all governing codes and ordinances. Check the location where the air conditioner will be installed. Make sure you have everything necessary for correct installation.

THE LOCATION SHOULD PROVIDE:

•A grounded electrical outlet within 6 ft. (183 cm) of where the power supply cord exits the air conditioner, for models:

HWR05XCM HWE06XCN HWE08XCN

•A grounded electrical outlet within 4 ft. (122 cm) of where the power supply cord exits the air conditioner, for models:

HWE10XCN HWE12XCN

NOTE: Do not use an extension cord, plug adapter, surge protector or multi-outlet adapter.

• Free movement of air in the room to be cooled.

Fig. 1

• A large enough opening for the air conditioner. (See Fig.1)

• The air conditioner must not be installed in a through-the-wall sleeve or in a wall. It can only be installed in a double-hung window.

NOTE: The outside cabinet louvers must not be obstructed by bushes,
	B-HEIGHT
trees, etc. Air must be able to pass freely through the cabinet
		A-WIDTH
louvers. (See Fig.2)

Fig. 2

AIR DISCHARGE

CABINET LOUVERS

WINDOW INSTALLATION

Window opening measurements: (See Fig.1)

	HWR05XCM	HWE06XCN/HWE08XCN	HWE10XCN/HWE12XCN
A. Width	22"-36"	25" - 36"	24-1/2" - 38"
B. Height	13-3/8"	13-3/8"	14-9/16"

PAGE 6 INSTALLATION REQUIREMENTS