Haier HWF05XCL Completing The Installation, Attach Side Curtains To Window, Final Installation

ENGLISH

COMPLETING THE INSTALLATION

ATTACH SIDE CURTAINS TO WINDOW Fig. 17

1. Pull the right -hand curtain and frame out until it fits flush to the side of the window frame. (See Fig.17)

2.Use a 1/8” drill bit to drill a starter hole through the top hole in the side curtain and into the window sash.

3.Insert one (1) 1" wood screws through the top hole of the left hand curtain and into the window sash. (See Fig.18)

4.Repeat for the left-hand curtain.

5.Use a 1/8" drill bit to drill a starter hole into the window sill using

the bottom hole in the side curtain as a guide.

6. Insert one (1) 1" wood screws through the bottom hole of

the right -hand curtain and into the window sill. (See Fig.19)

7. Repeat for the left-hand curtain.

Fig. 18

FINAL INSTALLATION

1.Uncoil the included foam seal. (See Fig.20)

2.Insert the foam seal behind the top of the lower window sash and against the glass of the upper window sash.

3.Place the window lock bracket as shown in the diagram using a screwdriver. Use a 1/8" drill bit to drill a starter hole through the hole in the window lock bracket and into the upper window sash. (See Fig.21)

4.Attach the window lock bracket to the upper window with one (1) 1" wood screw to secure the unit in place.

5.Plug unit into a grounded 3 prong outlet.

6.Press RESET on the power supply cord. On some devices a green light will come on. See “Electrical Requirements" for full detail.

Fig. 19

Fig. 20

Fig. 21

HOW TO INSTALL PAGE 13