Haier KGG6202-A1, KGG6201-A1, KGG5202-A1, KGG5201-A1 manual 167 $//$ 7,21, Dxwlrq 

,167 $//$ 7,21 GB

,167 $//$ 7,21 GB

,QVWDOOWKHVSODVKEDFN

To fit the rear panel/splashback, slide the lugs on the bottom of the panel into the matching slots on rear of stove and fix with screws provided.

Install the cooktop

Take the crown caps and burner crowns out of the oven, and put them to the correct place on the cooktop. The installation must be tied in very well.

&DXWLRQ 

Crown cap and Burner crown must be tie in

very well, otherwise the flame may not

soundness. Once this happened, close the tap, re-inst all the crown cap and burner crown when the cooker is cooling down.

*DV FRQQHFWLRQ

￿check:

-airing efficiency, that is efficiency of air exchange in the rooms, -tightness of gas fitting connections, -effectiveness of all functional elements of the cooker,

-if the electricity supply is adapted to function with a safety ground lead (zero)

￿provide the user with a connection certificate and give him or her instructions in cooker use.

&DXWLRQ 

The cooker may only be connected to a liquid gas cylinder or the existing gas supply by an authorized fitter, observing all

safety rules.

+RVH FRQQHFWLRQ

&DXWLRQ 

On completion of the cooker inst allation, the tightness of all connections should be

checked, e.g. applying water with soap.

Do not use fire to check tightness.

)OH[LEOHKRVH FRQQHFWLRQ

In case the appliance is connected by means of a flexible hose the position A of the hose is not permissible.

In case the connection hose is made of metal, position A is permissible.

A

D

B

C

&DXWLRQ 

The cooker should be connected to a gas

supply of the particular type of gas that the

appliance is manufactured to function with. Information about the type of gas that the

cooker has been adapted to by the factory is shown on the data plate. The cooker

should be connected exclusively by an appropriately authorized fitter and only he or she has the right to adapt the cooker to

adifferent type of gas.

)LWWLQJJXLGHOLQHV

A fitter should:

￿have a gas fitter’s authorisation

￿be acquainted with the information included on the data plate of the cooker about the type of gas to which

the cooker is adapted; the information should be compared with gas supply conditions at the place of installation.

￿Connect the appliance to the gas coupling by means of certified flexible hose. The hose may not touch the bottom panel of the appliance or the rear panel and ceiling of the oven.

￿Connect the appliance in accordance with the regulations of the local gas supplier.

%HJLQQLQJ RIRSHUDWLRQ

Start using the appliance in accordance with the instructions for use.

Lit up all burners and check the stability of the flame with high and low setting. Adjust air intake if necessary. After that, take time and explain the operation and control of the appliance to the user and read with him the instructions for use.

Liquefied gas connection

32

33