Haier KGG5201-A1 manual Replacement of the oven light bulb, Door removal, Regular inspections

Models: KGG6202-A1 KGG5202-A1 KGG6201-A1 KGG5201-A1

1 24
Download 24 pages 36.49 Kb
Page 23
Image 23

CLEANING AND MAINTENANCE

GB

 

 

CLEANING AND MAINTENANCE

GB

 

 

 

Replacement of the oven light bulb

In order to avoid the possibility of an electric shock ensure that the appliance is switched off before replacing the bulb.

Set all control knobs to the position “ ” and disconnect the mains plug.

Unscrew and wash the lamp cover and then wipe it dry.

Unscrew the light bulb from the socket, replace the bulb with a new

one – a high temperature bulb (300 ) with the following parameters: -voltage 120 V

-power 25 W

-thread G 9.

Door removal

In order to obtain easier access to the oven

chamber for cleaning, it is possible

to

remove the door, to do this, tilt the safety

 

catch part of the hinge upwards, close the door lightly, lift and pull it out towards you, in order to fit the door back on to the cooker, do the inverse. When fitting, ensure that the notch of the hinge is correctly placed on the protrusion of the hinge holder. After the door is fitted to the oven, the safety catch should be carefully lowered down again, if the safety catch is not set it may cause damage to the hinge when closing the door.

Removal of the internal glass panel

Unscrew and unfasten the plastic latch that is in the corner at the top of the door. Next take out the glass from the second blocking mechanism and remove. After cleaning, insert and block the glass panel, and screw in the blocking mechanism.

Regular inspections

Besides keeping the cooker clean, you should:

Carry out periodic inspections of the control elements and cooking units of the cooker, after the guarantee has expired you should have a technical inspection of the cooker carried out at a service centre at le ast once every two years.

Fix any operational faults.

Carry out periodical maintenance of the cooking units of the cooker.

Caution!

All repairs and regulatory activities should be carried out by the appropriate service centre or by an appropriately authorized fitter.

Oven light bulb

Screw the bulb in, making sure it is properly inserted into the ceramic socket.

Screw in the lamp cover.

Door removal

Removal of the internal glass panel

44

45

Page 23
Image 23
Haier KGG5201-A1, KGG6201-A1 manual Replacement of the oven light bulb, Door removal, Removal of the internal glass panel