Other functions
Display function
Press the DISPLAY button, then the channel number and system will be displayed on the screen.
Press the DISPLAY button again,it is disappear.
STILL
Press the STILL button, the STILL will display on the screen, at this time, the picture of TV is still, and press the STILL button again, the picture will resume.
Sleep
3
AUTO
B/G
The TV set will switch automatically to standby at the preset time with the SLEEP timer on. You may set the sleep time.
Each press of SLEEP button repeatedly on the remote control to select the number of preset minutes, the time will be set in sequence: (off, 5, 10, 15,30, 45, 60,90,120).
To confirm the sleep time setting, press SLEEP and the remaining time will be displayed for a few seconds.
To cancel the sleep time, press SLEEP repeatedly until the display turns to off.
Channel edit setup
1 Press CH.EDIT button to open/close the Channel Name menu, Note
opens when automatically will select the current channel
number.
2Press CH+/- button to select the desired channel number, and then press OK button to confirm.
3Press VOL+ button to move the cursor, and then use CH+/- button to alter the letter.
4When you are satisfied with your change, press the EXIT button to return to normal viewing or press MENU button to return to the previous menu.
No
Channel Name
0
1
2
3
4
5
6
7
Scan
This function fast glances over the channels(Skip as off) which each searches.
Press the SCAN button to start from the current channel, and switch a channel every 3 seconds, after scanning, and the program channel stop the current channel.
If you want to stop the function during auto tunning, simply press Scan or MENU button again, at this time, the program will stop the program Finally glances over.
31
