Adjust Menu
In PC input mode ,
When PC input mode is set
1 Press MENU button and then use VOL+/- button to select Adjust menu .
2 Press the VOL+ button and then use CH+/- button to select the item to be adjusted, then press the VOL+/- button to adjust the desired value.
Aspect Ratio
This is used to control aspect ration. (See 19 )
Auto Adjust
menu
OK
OK
OK
OK
OK
Adjusts the position of the picture automatically.
H. Position (Horizontal Position) Adjusts the picture`s position left or right.
V. Position (Vertical Position) Adjusts the picture`s position upward or downward
Clock
This is used for adjusting H Position and V Position as well as relative parameters in PC modes.
Phase
Adjust the picture if there is flicker of screen letters, color misalignment, or blurring in PC mode.
Adjust
Adjust the picture if there is flicker of screen letters, color misalignment, or blurring in PC mode.
RGB
Adjust picture if there is flicker of screen letters, color misalignment, or blurring in PC mode.
Default
Reset to original factory value.
Black stretch
This will increase automatically the contrast rage.
REC setup
Function Setting for TV Program Recording.(see 26)
Note:
1.As adjusting H position or V position parameter, It is natural that the picture will have faintness once in a while if the range is more, then to adjust contrarily to normal position.
2.As the frequency of display differ in PC device
you may select the appropriate frequency to obtain desired effect. If the signal of receive is excess, the picture can be not displayed or wrong on the screen.
25
