ALIGNING RiP FENCE
The Fence should slide easily alongthe Bare and always remain in alignment (parallel to sawblade and Miter
Gauge Grooves).
The alignment is maintained by a spring underneath the
Fence which bears against the Front Guide Bar.
To move the Fence, loosen the Lock Handle and grasp the Fence with one hand at the trent.
For very close adjustments, grasp the Guide Bar with |
|
both hands and move the Fence with your thumbs. | "_" |
/
SELF ALIGNING SPRING ADJUSTMENT
Place Fence on saw but DO NOT LOCK IT.
Move the REAR END of the Fence slightlyto the right or left. When you release it, the Fence should=spring" back to its original position.
If itdoes not, the spring pressure must be INCREASED.
1.Loosen the screws.
2.Move spring slightly toward front of Fence. Tighten screws.
\
17