External Equipment Connections

DVD connection

How to connect

1. Connect the DVD video outputs (Y, Pb/Cb, Pr/Cr) to the YUV IN jacks on the TV and connect the DVD audio outputs to the AUDIO IN jacks on the TV, as shown in the figure.

2. If your DVD only has an SCART output jack, connect this to the SCART input on the TV. as shown in thefigure.

NOTE: If your DVD player does not have component video output,use S-Video.

How to use

1. Turn on the DVD player, insert a DVD.

2. Use the TV/AV and VOL+/- button on the remote control toselect SCARTmode.

3. Press Play buttonon external equipment for program play.

4. Refer to the DVD player's manual for operating instructions.

COMPONENT IN

Pr/Cr Pb/Cb Y

L-AUDIO-R

SCART2

SCART1

ANT IN

or

DVD

 

VGA IN

COMPONENT IN

DVI IN

VGA

AUDIO

Pr/Cr Pb/Cb Y

L-AUDIO-R

HDMI/DVI VIDEO AUDIO

oror

RGB-DTV OUTPUT R AUDEO L

HDMI/DVI OUTPUT R AUDEO L

Pb

Pr

R AUDEO

 

Y

DTV connection

-To watch digitally broadcast programs, purchase and connecta digital set-topbox.

How to connect

Use the TV`s YPbPr IN and AUDIO IN jacks, VGA or HDMI/DVI VIDEO port for video connections, depending on your set-top box connections available. Then, make the corresponding audio connections.

How to use

1. Turn on the digital set-top box. (Refer to the owner`s manual for the digital set-top box.)

2. Use TV/AV on the remote control to select DVI mode.

3.Press Play buttonon external equipment for program play.

Digital Set-top Box

Page 13
Image 13
Haier P42A9-AKS owner manual DVD connection, How to connect, How to use