Remote controller
Inserting Batteries
1.Slide open the
cover of the battery compartment on the back of the remote controller.
2.Load two AA alkaline batteries in the compartment. paying attention to the polarity diagram in the battery compartment.(plus and minus poles to respective mark)
3.Replace the coverof the battery compartment.
Precautions
As strong light may interfere the signals, change your position to operate the remote controller if the television cannot be turned on or off as you expect.
Make sure that two AA alkaline batteries are loaded. The batteries must be of the same type. The batteries must be located properly. The batteries are not rechargeable.
Keep the remote controller away from heat source or humid area to ensure effective performance of the remote controller.
Make sure that there is no obstacle between the remote controller and television set.
