Buttons and interface location
Rear Control panel
USB Socket
VIDEO Input
Connects the video signal from a video device.
AUDIO Input
connect to hear stereo sound from an external device.
Switch power on/off
Power Cord Socket
This TV operates on AC power. The voltage is indicated on the specifications page. Never attempt to operate the TV on DC power
VIDEO |
L |
AUDIO |
R |
POWER |
VGA IN
L R
COMPONENT IN
DVI IN
AUDIO OUT | VGA | AUDIO | Pr/Cr Pb/Cb Y | HDMI/DVI VIDEO | AUDIO | SCART2 | SCART1 | ANT IN |
1.AUDIO OUT: Connect to optional external speaker(s).
2.VGA IN(PC)
Connect VGA analog cable from the PC to the VGA IN. Connect the audio cable from the PC to the VGA AUDIO IN.
3.COMPONENT IN
Connect the component cables from the component output of the video device to COMPONENT IN. Connect the audio cable from the video device to the
COMPONENT AUDIO IN.
4.DVI IN (HDMI-IN)
Connect the HDMI cable from the HDMI output of the digital video device to the HDMI/DVI VIDEO.(If the PC has DVI only,Connect the audio cable from the digital video device to the AUDIO .)
5-6.SCART2/SCART1
Used to connect to the DVD/ VCR/ broadcasting receiver or other equipment.
7.Earphone port
8.ANT IN: Connect antenna or CATV 75 coaxial cable to receive TV/CATV signal.