Haier P50V6-A8S owner manual DVD connection, How to connect

External Equipment Connections

DVD connection

How to connect

1. Connect the DVD video outputs (Y, Pb/Cb, Pr/Cr) to the COMPONENT IN jacks on the TV and connect the DVD audio outputs to the AUDIO IN jacks on the TV, as shown in thefigure.

2. If your DVD only has an SCART output jack, connect this to the SCART input on the TV. as shown in thefigure.

NOTE: If your DVD player does not have component video output,use S-Video.

How to use

1. Turn on the DVD player, insert a DVD.

2. Use the TV/AV button on the remote control to selectSCART mode.

3. Press Play buttonon external equipment for program play.

4. Refer to the DVD player's manual for operating instructions.

COMPONENT IN

Pr/Cr Pb/Cb Y L-AUDIO-R SCART2 SCART1 ANT IN

or

DVD

	VGA IN	COMPONENT IN			DVI IN
VGA	AUDIO	Pr/Cr Pb/Cb Y	L-AUDIO-R	DVI	AUDIO

or	or
RGB-DTV OUTPUT R AUDEO L	DVI-DTV OUTPUT R AUDEO L	R AUDEO
	Y Pb Pr

DTV connection

-To watch digitally broadcast programs, purchase and connect a digital set-top box.

How to connect

Use the TV`s COMPONENT IN, VGAor DVI port for video connections, depending on your set-top box connections available. Then, make the corresponding audio connections.

How to use

1. Turn on the digital set-top box. (Refer to the owner`s manual for the digital set-top box.)

2. Use TV/AV on the remote control to select DVI mode.

3.Press Play button on external equipment for program play.

Digital Set-top Box